Install French Bifold Doors for your Home

French bifold door image
Constructed French bifold door

French bifold doors are used in the form of pivot pins for the movements that are present at the inner side of their bottom and top edges. It is among the typical feature found in most of the French bifold doors along with the sliding track that is usually observed on the top surface of the door. Most of the time, French bifold doors are installed for closet or are commonly used as the folding doors between the closely situated rooms. French bifold doors are hinged and inserted by using pins and then mounted on the door track. If you’re thinking that installing the French bifold doors is not a demanding task than you’re wrong. It’s not a demanding task but it does need certain amount of attention while installing it. And for starters, you might need to pay more attentions and should be very careful while taking proper measurement because basically French doors swings to the inner side, towards the interiors of your home. So it’s advisable of allocating proper space for your French door to close and open freely. Similar to that, it’s also important to be cautious while measuring the length and width of the opening where the French bifold door is to be installed. It’s advisable of leaving some space back for further changes.

French bifold door installation:

  • Start by marking with a pencil that which side your door should be opened. And which side should be used for installing the external knobs of the door.
  • Make the use of hinges and fasten them on the door by screwing them properly. For screwing the hinges of the door, make the use of pencil for marking the positioning of the door. Mark it about eight inches from the top to the middle section of the door and from the bottom say for 12 inches to its middle section.
  • Connect the hinges to the respective positions marked by the pencil and point it up towards the market lines. Fasten the pivot plates to the bottom and the top door. Make the use of a drilling machine for screwing it well on its place.
  • Now attach the locking arms of the door. These are offered as any part of the commercial production door kit. It’s advisable of ensuring that the locking arms of the door should open to the rear side of the door.
  • Now, set up the French bifold door’s tracks on the door frames installed. Start screwing the top section of the door tracks into the door frame. But wait for some while before you’re installing the bottom section of the door.
  • Now, it’s the right time for hanging the door. Just slide up the pins into the pivot plates installed along with the top end of the French door. Secure the pivot plate by twisting them to its locking configuration.
  • Now, secure the bottom section by screwing the door into its pivot plates. It’s advisable of double checking the fixation into the door frame for better adjustments.

Natural Fiber Rug Cleaning Process

Natural Fiber Rug cleaning
Cleaning a Natural Fiber Rug

Want to get a natural and organic feel in the interiors of your home? Natural fiber rugs are best suitable for your home. This rug is basically the combination of warm tines with intricate designs and patterns for creating an attractive look. Generally, natural fiber rugs are made up of sisal or wool and sea grass. It helps in increasing and working as a great addition to any of your room. If you’re thinking that natural fiber rugs can be cleaned and treated similar to carpets, than you’re wrong as it is not made up of any synthetic fibers. Here are the tips and steps on cleaning natural fiber rugs for making your rugs look neat and new for a longer period of time.

Steps on cleaning natural fiber rugs:

Start the process by vacuuming:

When it comes for maintaining and cleaning the natural fiber rugs, vacuuming it well is one of the most overlooked steps by the home owners. Regular cleaning and maintaining of natural fiber rugs should be included when you’re cleaning your home interiors.

Regular vacuuming is very important because it helps in reducing the accumulation of dirt and debris in your rugs. Regular vacuuming helps in loosening the debris and dirt. But, if you’re not performing this step, it might lead in accumulating the dirt regularly by the foot traffic into the natural fibers and it create problem in removing it off the rugs.

Removing the stains:

It’s very important to remember by the home owners that natural fiber rugs do not hold up more when it’s subject to extreme moisture situation. So, if you’re thinking that the natural fiber rugs can be easily cleaned likewise other rugs, than you’re wrong. It might not be cleaned in a similar way like other rugs.

For removing the stains that stays even after vacuuming your rugs well, it might require some cleaning solutions and materials for cleaning it permanently off from your rugs. Make the use of white vinegar and dishwashing detergent for preparing the cleaning solution.

Mix it in a bowl and add two cups of Luke warm water into the solution. Here you’re ready for beginning with the process. Make the use of a clean and soft rag for blotting the area affected by the stain. Dampen the cleaning solution on the stain. It’s advisable of repeating the step unless and until the entire stain gets completely off from the surface of your rug.

Dry up your rug:

Natural fiber rugs might invite serious damaging effects if you kept it wet for a longer period of time. Make sure that the drying process if performed effectively. If not dried thoroughly, it might invite curling of corners and might also lead in pulling off the fibers from the rug.

One of the best methods for drying off your natural fiber rug is by rolling it up and dry towel whole of the rug. This will help in absorbing excessive moisture present in your rig. Repeat this step unless your rug is completely dry.